Manual Curved Treadmill
Bilink’s manual curved treadmill is a type of treadmill that operates without any motorized components and is powered solely by the user’s own force. Unlike traditional motorized treadmills, a manual curved treadmill lacks a motor to control speed and incline, and instead relies on the user’s stride and power to drive and control the running speed.
Structure:
Sports mode: 1-8 gears, three sports modes
Braking mode: Magnet resistance adjustment
Assembly size: 1990*855*1500mm (L x W x H)
Assembly weight 157 kg & Maximum load capacity 200 kg
Pedal type: reversible 2.5 cm runway
Belt type: Siegelin 2.2 ultra-low friction coefficient running belt
Running Belt Size:1700*440mm
Running belt size: 3325*558mm
Slope range: 7° fixed
Specifications(Specs):
Product Name | Weight Treadmill |
Type Number | BK-CT007 |
N.W.: | 157kgs/346lbs |
G.W.: | 167kgs/368lbs |
Installation Size: | 1990*855*1500mm/ 78*33*59inch |
Running Area: | 1700*440mm/ 66*17inch |
Slope Range | 7° |
Vertical Traction
Feature:
It is a natural path of motion. Thigh pads easily adjust to provide stability and comfort, and ergonomically rotating handles allow for natural user defined movement, greater variety, and increased muscular involvement.
Clear and concise muscle targetmakes it easier for trainers to know and learn;Humanization design adjustment.Trainers can adjust the positionaccording to personal body condition
Installation size:1644*1472*1850mm/ 64*58*72inch
High density foam upholstery, “furniture grade” PU leather, and integral ABS guard cover.
POM material pulley , CNC processing, customized high quality bearing to withstand High-intensity and long-term use.
Full shroud, 4mm thickness ABS virgin material, durable and eco friendly.
PU leather cushion,air permeability,sweating,comfort and anti-skid;Fitness equipment uses 6mm thick steel cable,which is more durable and safe
Quick Judgement Tips
We have prepared some little knowledge about fitness equipment for you
#Originality
Check whether there is an R&D center to design its own strength equipment; talk with the designers about design concepts.
#Movement Angle
Ask designers at the R&D center if they usually work out with gym equipment. Designers who do not work out with gym equipment should never design any strength training machine.
You should try the fitness equipment yourself. You need to experience the following three aspects:
Whether it is smooth to use.
Whether specific equipment is activating your targeted muscle group.
For converging and diverging equipment, whether there is a peak contraction experience.
#Finish
Know about the specific treatment methods applied to the surface.
Check if the surface is smooth to the touch.
Take a hard metal object, such as a key, and scratch the surface of the equipment in order to see the adhesion of the surface coating.
#Frame Pipe
Pipe standard: ask the supplier about the standard of this pipe. In China, for example, you should expect fitness equipment pipes to meet Q235 standard.
Pipe Size: Look for 40mm x 80mm and above for the length and width of the frame pipe, preferably with 3.0mm in thickness.
Treatment: bending production procedure is preferred over cutting and welding.
Check the thickness of the raw material, not the the painted tube.
#Connections
Ask the factory representative about the treatment methods, as well as the theoretical basis of the connection.
Check the thickness of the connecting plate and the strength of the screw.
#Seat
-Seat Fillings:
Press the seat firmly with your thumb or apply a specific instrument to measure its density level.
-Seat Leather:
Smell: Check whether there is any pungent smell.
Tactile impression: Touch the surface by hand and confirm the tactile impression.
Density: Observe from the cut/side surface and check its stomata; the more stomata there is, the lower the density and quality.
Thickness: Check the thickness of the material; the thicker, the better;
-Seat Support Plate
Check the material used. Generally speaking, ABS is better than iron board and plywood.
Check the appropriateness of the match between fillings and support plate.
-Seat Adjuster
Adjust the seat several times to check whether it is easy to use. After adjusting the seat, sit on it and shake to test its stability.
#Components
-Pulley
Material: Determine the material used and assess whether it is appropriate based on our comparison chart.
Stability: Make the pulley rotate and observe whether it wobbles.
-CAM:
Determine the material applied and assess whether it is suitable according to the comparison chart.
Check whether the pulley and CAM are smooth when used.
Use the machine and confirm whether its design is in line with the principle of movement.
-Cable:
Check the thickness of the cable; the thicker it is, the more solid the cable will be.
If you buy for commercial use, never be cheated by manufacturers who apply home use material to industrial equipment.
Ask about the maximum load capacity along with fatigue test report and check the results.
#Safety
Meet the standard ISO20957: Check whether there is a certificate of ISO20957, which means the equipment has passed the International Organization for Standardization.
Stability: Try to push a pin-loaded machine to check if it is stable. On machines like the Lat Pulldown, select the maximum weight, then suddenly loosen the handle to see if the device is still stable.
Total net weight: subtract the weight plates; the heavier, the safer.
Overall structure: the surface of the fitness equipment pipe should be free of any protrusions so as to avoid injury.
The edges and corners of the surface should have a radius r ≥ 2.5mm. They should also be free of burrs and make use of round corners.
tube ends: All the tube ends should be in the accessible hand, and the foot area should be closed off.
You should be able to stop the motion at any time.
The weight selection pin should be fitted with a holding system to prevent accidental change or movement during exercise.
Manufacturing Process
Bending
Bending is commonly used in the fabrication of fitness equipment to create components such as frames, handles, supports, and brackets.
01
Cutting
Cutting is an essential step in the manufacturing of fitness equipment as it helps shape various components and parts.
02
Stamping
Stamping involves placing a metal workpiece between dies and applying pressure to deform the material into the desired shape.
03
Welding
Welding in fitness equipment manufacturing is to create strong and permanent connections between various parts, ensuring structural stability, durability, and safety.
04
Sandblasting
Sandblasting involves propelling fine granular materials, such as sand or abrasive particles, at high speeds onto the surface of the metal using compressed air or a specialized sandblasting machine.
05
Power Coating
Powder coating involves the application of a dry powder, typically made of finely ground particles of resin, pigment, and additives, to the surface of the metal.
06
Assembly&Test
Assembly&Test ensure that the fitness equipment is properly constructed, functions correctly, and meets quality standards before it is ready for use by consumers.
07
Package
Packaging serves multiple purposes, including protecting the fitness equipment during transit, providing information to consumers, and enhancing the overall presentation and marketability of the product.
08
Related Products
Must-read Blogs For Gym Owner
What Gym Equipment Is Best For Abs
This article is to help you identify the 7 best gym machines for achieving strong and well-defined abdominal muscles. By exploring various tools and their benefits, you’ll gain insights into which equipment can most effectively target and strengthen your core, ultimately enhancing your overall fitness routine.
Where to Buy Fitness Equipment – A Guide for B2B and B2C Customers
In today’s fast-paced society, maintaining a healthy lifestyle amidst busy schedules and numerous commitments has become increasingly challenging. Survey findings Purchasing fitness equipment brings numerous benefits that contribute to a healthier lifestyle.
Get in Touch
We will contact you as soon as we see it and give you a quote
Address:1709, Building 28, Vanke Cloud Valley, Jiangbei District, Ningbo, Zhejiang Province, China,315036
Phone Number:+86 13165995179(Wechat, Whatsapp)
WhatsApp:+86 13165995179
WeChat:+86 13165995179